How it works |
||
 |
And
this is the principle that makes everything possible. The
rotating magnetic field of the actuator turns the screw inside
the joiner. The fine thread is screwed into the threaded bolt in
the opposite part to ensure a tight connection. The impact
wrench effect of the INVIS joiner produces a knocking sound at
the end of the screwing process (after approx. 5 seconds). This indicates that the connection is closed and also ensures amazingly high tightening values. To open the connection, the rotation of the actuator must be changed. It is held once again parallel to the joiner axes and the joint is opened without contact. |
|
 |
||
 |
||
The economic benefit of INVIS |
||
 |
INVIS has all the advantages of a dowel connection: time-saving, simple drilling. No lateral holes means no costly machine time is required. Loss of material strength is reduced to a minimum. Production and assembly is performed quickly and without complications, whether at the origin of manufacture or on the spot. The INVIS actuator performs through the building material (as long as this is non magnetic) and connects and detaches conveniently from outside. |
|
The practical advantages of INVIS |
||
 |
The INVIS actuator is the practical magic wand of the system. It is extremely simple to use: place the actuator on work parallel to the joiner, tighten the joiner approximately five seconds, that's all there is to it! the tapping sound indicates that the joiner has tightened. To detach follow same procedure reversing INVIS actuator rotation. The INVIS actuator can be used anywhere thanks to the storage battery. |
|